SPECIFICATIONS FOR JN01
| Model | JN01 |
| Function | Measuring - Cutting - Both ends stripping - Both ends crimping - Auto-blade depth adjustment - Auto-crimping position adjustment - Auto-strip length adjustment - Half-strip on No.1 crimping - Step driving |
| Capacity | 1.0 sec/pc (in case of min. wire length) - In case of half-strip, machine speed will be reduced depending on wire size |
| Wire Size | 0.08~2.0mm2 (AWG#28~#14) Max O.D. Ø3.4mm |
| Cutting Length | 50~2,000mm (9,999mm) - Min length varies depends on the stripping length and the type of terminal. |
| Cutting Accuracy | Variation within 1mm+ (set length x 0.002) |
| Stripping Length | No. 1 side: 1.5~13mm (20mm w/o crimping, 35mm half-stripping), No.2 side: 1.5~10mm |
| Press Capacity | 19,600N (2 TON x 2) |
| Detector | Low air pressure - Crimping miss - Wire stripping miss - Abnormal action of wire reel stand |
| Power Source | AC200V (within ± 10%) 50/60Hz single phase 7A |
| Compressed Air | 0.5Mpa (5kgf/cm2) approx. 200NL/min (use clean dry air) |
| Dimension - Mass | 1,140W x 670D x 1,400H (mm) - (approx. 450kg) |
| Option | Wire reel stand (bundle, reel) - Wire pre feeder (2m, 5m) - Paper winding unit - Belt chute - Wire joint detector - Terminal presence/overload detector - Emergency light ASY - Other makers applicator conversion kit |